PANELS PERFORATIONS

     

    There is a wide range of perforations to choose from, making it possible to select the most appropriate based on REGULAR and DIAGONAL perforations may have the following characteristics:
    TOTAL: the panel will be completely perforated, with a smooth perimeter border of approximately 10 mm;
    CENTRAL: the panel will have perforations in the center measuring 400x400 mm,
    with a smooth border of approximately 100 mm;
    SPECIAL: perforations and smooth borders according to specific requirements upon request.
    It is also possible to make a hole on all of our panel models for insertion of both round and square spotlights.

    HOLE FOR ROUND SPOTLIGHTS: Maximum diameter 300 mm
    HOLE FOR SQUARE SPOTLIGHTS: Maximum 300 x 300 mm

    ILLUSTRATIVE
    DRAWING
    CODE PERFORATION DESCRIPTION
    R0701 Extra micro-perforation
    Diameter: 0,70 mm - 0,75 mm
    Regular
    Perforation inter-axes: 5x5
    Perforation surface: 1% circa - 1,5% approx.
    R1512 Micro-perforation
    Diameter: 1,5 mm
    Regular
    Perforation inter-axes: 4x4
    Perforation surface: 12,5% approx.
    D1525 Micro-perforation
    Diameter: 1,5 mm
    Diagonal
    Perforation inter-axes: 4x4
    Perforation surface: 25% approx.
    R211 Perforation
    Diameter: 2 mm
    Regular
    Perforation inter-axes: 5x5
    Perforation surface: 11% approx.
    D222 Perforation
    Diameter: 2 mm
    Diagonal
    Perforation inter-axes: 5x5
    Perforation surface: 22% approx.
    R2516 Perforation
    Diameter: 2,5 mm
    Regular
    Perforation inter-axes: 5,5x5,5
    Perforation surface: 16% approx.
    R308 Perforation
    Diameter: 3 mm
    Regular
    Perforation inter-axes: 9x9
    Perforation surface: 8% approx.
    D316 Perforation
    Diameter: 3 mm
    Diagonal
    Perforation inter-axes: 9x9
    Perforation surface: 16% approx.
    Q540 Square perforation
    5x5 pitch 8 mm
    Perforation surface: 40% approx.
    Q1045 (45%)
    Q1020 (20%)
    Square perforation
    10x10 mm
    Pitch 14 mm - perforation surface: 45% approx.
    Pitch 20 mm - perforation surface: 20% approx.
    04/5,5x5,5 Perforation
    Perforations diameter: 2,5 mm
    Profiles diameter: 41x41 mm
    Space between profiles: 8,5 mm
    Perforation surface: 15% approx.

     

    >> DOWNLOAD PRODUCT DETAILS