PERFORATION

     

    The various types of perforations that can be selected based on the use for the plank are presented as follows.
    REGULAR and DIAGONAL perforations may have the following characteristics:
    TOTAL: the plank will be completely perforated, with a smooth perimeter border of
    approximately 10 mm
    SPECIAL: perforations and smooth borders according to specific requirements upon request

     

    PERFORATION Ø 2 mm

    ILLUSTRATIVE
    DRAWING
    CODe PERFORATION DESCRIPTION
    A Perforation inter-axes: 5x5
    Regular
    For pitch : 300
    Perforation surface: 11% approx.
    B Perforation inter-axes: 4x7
    Regular
    For pitch: 100 - 150 - 200
    Perforation surface: 11% approx.
    C Perforation inter-axes: 8x7
    Regular
    For pitch: 100 - 150 - 200
    Perforation surface: 5% approx.
    D Perforation inter-axes: 10x10
    Regular
    For pitch: 300
    Perforation surface: 5,5% approx.
    E Perforation inter-axes: 5x5
    Diagonal
    For pitch: 300
    Perforation surface: 22% approx.
    F Perforation inter-axes: 4x7
    Diagonal
    For pitch: 100 - 150 - 200
    Perforation surface: 22% approx.
    G Perforation inter-axes: 10x10
    Diagonal
    For pitch: 300
    Perforation surface: 11% approx.

    PERFORATION Ø 3 mm

    ILLUSTRATIVE
    DRAWING
    CODE PERFORATION DESCRIPTION
    H Perforation inter-axes: 10x10 mm
    Regular
    For pitch: 300
    Perforation surface: 7% approx.
    I Perforation inter-axes: 10x6 mm
    Regular
    For pitch: 100 - 150 - 200
    Perforation surface: 11% approx.
    L Perforation inter-axes: 10x12 mm
    Regular
    For pitch: 100 - 150 - 200
    Perforation surface: 5% approx.
    M Perforation inter-axes: 10x10 mm
    Diagonal
    For pitch: 300
    Perforation surface: 14% approx.
    N Perforation inter-axes: 10x6 mm
    Diagonal
    For pitch: 100 - 150 - 200
    Perforation surface: 23% approx.
    O Perforation inter-axes: 10x12 mm
    Diagonal
    For pitch: 100 - 150 - 200
    Perforation surface: 11% approx.

     

    FORATURE Ø VARI

    ILLUSTRATIVE
    DRAWING
    CODE PERFORATION DESCRIPTION
    P EXTRA MICRO-PERFORATION
    Diameter: 0,7 mm
    Regular
    Perforation inter-axes: 5x5
    Perforation surface: 1% approx.
    Q MICRO-PERFORATION
    Diameter: 1,5 mm
    Regular
    Perforation inter-axes: 4x4
    Perforation surface: 11% approx.
    R MICRO-PERFORATION
    Diameter: 1,5 mm
    Diagonal
    Perforation inter-axes: 4x4
    Perforation surface: 22% approx.
    S PERFORATION
    Diameter: 2,5 mm
    Regular
    Perforation inter-axes: 5,5x5,5
    Perforation surface: 16% approx.
    T SQUARE PERFORATION
    5x5 pitch 8 mm
    Perforation surface: 40% approx.

     

    >> SCARICA SCHEDA TECNICA